Workshop Instruction Manual No. 8 For The Triumph Tiger Cub Models T15 T20 T20C T20S - Anon.Triumph Engineering Co., 1964, Paperback.
Condition: Good. A pleasant enough reading copy. Notably rubbed at the outside edges of the cover and spine, somewhat faded. Edges of the text block lightly spotted. Text complete, clean and tight bar light markings to the top corner of several pages.
First in this, paperback, edition. Illustrated with black and white photographs & diagrams. From the preface: “The Triumph “Tiger Cub” has been so designed that the average owner or mechanic will have no difficulty in servicing it if full use is made of this book. The book is written on a purely practical basis and no attempt has been made to introduce the theoretical side. To the uninitiated we advise that major repairs such as engine and gearbox unit and telescopic fork overhauls are entrusted to a Triumph Dealer who will have the necessary facilities to carry out this type of work. Each section of the book is headed by a general description. It is then followed by a complete account of the dismantling, examination of the parts and the re-assembly procedure of the unit concerned. We have endeavoured to do this in the most simple form to obviate any difficulties on the part of the operator, who may be a newcomer to motorcycling or not conversant with repair procedure. Each chapter deals with a specific operation (i.e. Dismantling the Engine) which is then broken down into paragraphs and sub-paragraphs. The sequence in which they are broken down is the correct dismantling or assembly procedure. In order not to confuse the operator, sub-assemblies (i.e. cylinder head or flywheel assembly) are dealt with as separate units.”
Size: 8½" x 5½". 136 pages.